产品名称
三甘醇二甲基丙烯酸酯, contains 200 ppm monomethyl ether hydroquinone as inhibitor, 99%
Quality Level
assay
99%
form
liquid
contains
200 ppm monomethyl ether hydroquinone as inhibitor
reaction suitability
reagent type: cross-linking reagent
reaction type: Polymerization Reactions
refractive index
n20/D 1.461 (lit.), n/D 1.4613
bp
170-172 °C/5 mmHg (lit.)
density
1.092 g/mL at 25 °C (lit.), 1.074 g/mL
polymer architecture
shape: linear
functionality: homobifunctional
storage temp.
2-8°C
SMILES string
CC(=C)C(=O)OCCOCCOCCOC(=O)C(C)=C
InChI
1S/C14H22O6/c1-11(2)13(15)19-9-7-17-5-6-18-8-10-20-14(16)12(3)4/h1,3,5-10H2,2,4H3
InChI key
HWSSEYVMGDIFMH-UHFFFAOYSA-N
General description
Triethylene glycol dimethacrylate is used as a cross-linking agent in the synthesis of poly (methacrylic acid-g-ethylene glycol ) hydrogels which shows large changes in swelling due to changes in pH, temperature and solvent composition. They are also used as a divinylic methacrylic monomer which are widely used to form copolymers with divinylbenzene (DVB) and glycidyl methacrylate (GMA) or hydroxyethyl methacrylate (HEMA) comonomers.
Application
- Used as a diluent comonomer in dimethacrylate based dental composites.
- Used as a branching agent in the atom transfer radical polymerization (ATRP) of styrene.
Features and Benefits
Lower viscosity compared to other dimethacrylate monomers enabling higher amounts of filler to be incorporated in dental composites. Non-toxic and can be rapidly polymerized in the presence of oxygen and water.
Still not finding the right product?
Explore all of our products under 三甘醇二甲基丙烯酸酯
signalword
Warning
hcodes
存储类别
10 - Combustible liquids
flash_point_f
332.6 °F - closed cup
flash_point_c
167 °C - closed cup
Hazard Classifications
Skin Sens. 1B
I Sideridou et al.
Biomaterials, 23(8), 1819-1829 (2002-04-13)
In this work the room-temperature photopolymerization of Bis-GMA, Bis-EMA, urethane dimethacrylate (UDMA) and triethylene glycol dimethacrylate (TEGDMA) induced by camphoroquinone/N,N-dimethylaminoethyl methacrylate, as photo-initiator system, was followed by FT-IR. The results obtained were then fitted by a non-linear least square method
Controlled release by using poly (methacrylic acid-g-ethylene glycol) hydrogels
Peppas, N. A., & Klier, J.
Journal of Controlled Release : Official Journal of the Controlled Release Society, 16(1), 203-214 (1991)
Development of branching in atom transfer radical copolymerization of styrene with triethylene glycol dimethacrylate
Yang, H. J., Jiang, B. B., Huang, W. Y., Zhang, D. L., Kong, L. Z., Chen, J. H., & Yang, Y.
Macromolecules, 42(16), 5976-5982 (2009)
全球贸易项目编号
| 货号 | GTIN |
|---|---|
| 759406-10ML | 04061837889592 |
| 759406-50ML | 04061837889608 |
